Utente:Grasso Luigi/sanbox1/Equazione di Debye–Hückel

Distribution of ions in a solution

The chemists Peter Debye and Erich Hückel noticed that solutions that contain ionic solutes do not behave ideally even at very low concentrations. So, while the concentration of the solutes is fundamental to the calculation of the dynamics of a solution, they theorized that an extra factor that they termed gamma is necessary to the calculation of the activity coefficients of the solution. Hence they developed the Debye–Hückel equation and Debye–Hückel limiting law. The activity is only proportional to the concentration and is altered by a factor known as the activity coefficient . This factor takes into account the interaction energy of ions in solution.

Legge di limitazione di Debye – HückelModifica

Template:For In order to calculate the activity   of an ion C in a solution, one must know the concentration and the activity coefficient:

  is the activity coefficient of C,
  is the concentration of the chosen standard state, e.g. 1 mol/kg if molality is used,
  is a measure of the concentration of C.

Dividing   with   gives a dimensionless quantity.

The Debye–Hückel limiting law enables one to determine the activity coefficient of an ion in a dilute solution of known ionic strength. The equation is{{subst:#if:Hamann

 |{{subst:#if:|<ref name="" />}}

}}section 2.5.2



  is the charge number of ion species i,
  is the elementary charge,
  is the inverse of the Debye screening length (defined below),
  is the relative permittivity of the solvent,
  is the permittivity of free space,
  is Boltzmann's constant,
  is the temperature of the solution,
  is Avogadro's number,
  is the ionic strength of the solution (defined below),
  is a constant that depends on temperature.

If   is expressed in terms of molality, instead of molarity (as in the equation above and in the rest of this article), then an experimental value for   of water is   at 25 °C. It is common to use a base-10 logarithm, in which case we factor  , so A is  .

It is important to note that because the ions in the solution act together, the activity coefficient obtained from this equation is actually a mean activity coefficient.

The excess osmotic pressure obtained from Debye–Hückel theory is in cgs units: [1]


Therefore, the total pressure is the sum of the excess osmotic pressure and the ideal pressure  . The osmotic coefficient is then given by


Sintesi del primo articolo di Debye e Hückel sulla teoria degli elettroliti diluitiModifica

The English title of the article is "On the Theory of Electrolytes. I. Freezing Point Depression and Related Phenomena". It was originally published in 1923 in volume 24 of a German-language journal Physikalische Zeitschrift. An English translation[2]217–63 of the article is included in a book of collected papers presented to Debye by "his pupils, friends, and the publishers on the occasion of his seventieth birthday on March 24, 1954".[2]xv An additional translation by Michael J. Braus notes several errors in the 1954 edition's (InterScience Publishers, now Wiley (publisher))translation and typesetting, notably the erroneous use of   where   was intended for what the authors considered the most important variable in their work.[3] The mistaken symbol   carried forward throughout the literature of physical chemistry, namely the Debye length in an electrolyte solution. The article deals with the calculation of properties of electrolyte solutions that are under the influence of ion-induced electric fields, thus it deals with electrostatics.

In the same year they first published this article, Debye and Hückel, hereinafter D&H, also released an article that covered their initial characterization of solutions under the influence of electric fields called "On the Theory of Electrolytes. II. Limiting Law for Electric Conductivity", but that subsequent article is not (yet) covered here.

In the following summary (as yet incomplete and unchecked), modern notation and terminology are used, from both chemistry and mathematics, in order to prevent confusion. Also, with a few exceptions to improve clarity, the subsections in this summary are (very) condensed versions of the same subsections of the original article.


D&H note that the Guldberg–Waage formula for electrolyte species in chemical reaction equilibrium in classical form is[2]221



  is a notation for multiplication,
  is a dummy variable indicating the species,
  is the number of species participating in the reaction,
  is the mole fraction of species  ,
  is the stoichiometric coefficient of species  ,
K is the equilibrium constant.

D&H say that, due to the "mutual electrostatic forces between the ions", it is necessary to modify the Guldberg–Waage equation by replacing   with  , where   is an overall activity coefficient, not a "special" activity coefficient (a separate activity coefficient associated with each species)—which is what is used in modern chemistry Template:As of.

The relationship between   and the special activity coefficients   is[2]248



D&H use the Helmholtz and Gibbs free entropies   and   to express the effect of electrostatic forces in an electrolyte on its thermodynamic state. Specifically, they split most of the thermodynamic potentials into classical and electrostatic terms:



  is Helmholtz free entropy,
  is entropy,
  is internal energy,
  is temperature,
  is Helmholtz free energy.

D&H give the total differential of   as[2]222



  is pressure,
  is volume.

By the definition of the total differential, this means that


which are useful further on.

As stated previously, the internal energy is divided into two parts:[2]222



  indicates the classical part,
  indicates the electric part.

Similarly, the Helmholtz free entropy is also divided into two parts:


D&H state, without giving the logic, that[2]222


It would seem that, without some justification,


Without mentioning it specifically, D&H later give what might be the required (above) justification while arguing that  , an assumption that the solvent is incompressible.

The definition of the Gibbs free entropy   is[2]222–3


where   is Gibbs free energy.

D&H give the total differential of   as[2]222


At this point D&H note that, for water containing 1 mole per liter of potassium chloride (nominal pressure and temperature aren't given), the electric pressure   amounts to 20 atmospheres. Furthermore, they note that this level of pressure gives a relative volume change of 0.001. Therefore, they neglect change in volume of water due to electric pressure, writing[2]223


and put


D&H say that, according to Planck, the classical part of the Gibbs free entropy is[2]223



  is a species,
  is the number of different particle types in solution,
  is the number of particles of species i,
  is the particle specific Gibbs free entropy of species i,
  is Boltzmann's constant,
  is the mole fraction of species i.

Species zero is the solvent. The definition of   is as follows, where lower-case letters indicate the particle specific versions of the corresponding extensive properties:[2]223


D&H don't say so, but the functional form for   may be derived from the functional dependence of the chemical potential of a component of an ideal mixture upon its mole fraction.[4]

D&H note that the internal energy   of a solution is lowered by the electrical interaction of its ions, but that this effect can't be determined by using the crystallographic approximation for distances between dissimilar atoms (the cube root of the ratio of total volume to the number of particles in the volume). This is because there is more thermal motion in a liquid solution than in a crystal. The thermal motion tends to smear out the natural lattice that would otherwise be constructed by the ions. Instead, D&H introduce the concept of an ionic atmosphere or cloud. Like the crystal lattice, each ion still attempts to surround itself with oppositely charged ions, but in a more free-form manner; at small distances away from positive ions, one is more likely to find negative ions and vice versa.[2]225

L'energia potenziale di una soluzione ionica genericaModifica

Electroneutrality of a solution requires that[2]233



  is the total number of ions of species i in the solution,
  is the charge number of species i.

To bring an ion of species i, initially far away, to a point   within the ion cloud requires interaction energy in the amount of  , where   is the elementary charge, and   is the value of the scalar electric potential field at  . If electric forces were the only factor in play, the minimal-energy configuration of all the ions would be achieved in a close-packed lattice configuration. However, the ions are in thermal equilibrium with each other and are relatively free to move. Thus they obey Boltzmann statistics and form a Boltzmann distribution. All species' number densities   are altered from their bulk (overall average) values   by the corresponding Boltzmann factor  , where   is the Boltzmann constant, and   is the temperature.[5] Thus at every point in the cloud[2]233


Note that in the infinite temperature limit, all ions are distributed uniformly, with no regard for their electrostatic interactions.[2]227

The charge density is related to the number density:[2]233


When combining this result for the charge density with the Poisson equation from electrostatics, a form of the Poisson–Boltzmann equation results:[2]233


This equation is difficult to solve and does not follow the principle of linear superposition for the relationship between the number of charges and the strength of the potential field. It has been solved by the Swedish mathematician Thomas Hakon Gronwall and his collaborators physicical chemists V. K. La Mer and Karl Sandved in a 1928 article from Physikalische Zeitschrift dealing with extensions to Debye–Huckel theory, which resorted to Taylor series expansion.

However, for sufficiently low concentrations of ions, a first-order Taylor series expansion approximation for the exponential function may be used (  for  ) to create a linear differential equation (Hamann, Hamnett, and Vielstich. Electrochemistry. Wiley-VCH. section 2.4.2). D&H say that this approximation holds at large distances between ions,[2]227 which is the same as saying that the concentration is low. Lastly, they claim without proof that the addition of more terms in the expansion has little effect on the final solution.[2]227 Thus


The Poisson–Boltzmann equation is transformed to[2]233


because the first summation is zero due to electroneutrality.[2]234

Factor out the scalar potential and assign the leftovers, which are constant, to  . Also, let   be the ionic strength of the solution:[2]234


So, the fundamental equation is reduced to a form of the Helmholtz equation: [6]


Today,   is called the Debye screening length. D&H recognize the importance of the parameter in their article and characterize it as a measure of the thickness of the ion atmosphere, which is an electrical double layer of the Gouy–Chapman type.[2]229

The equation may be expressed in spherical coordinates by taking   at some arbitrary ion:[7][2]229


The equation has the following general solution (keep in mind that   is a positive constant):[2]229

Errore del parser (errore di sintassi): {\displaystyle \varphi(r) = A \frac{e^{-\sqrt{\kappa^2} r}}{r} + A' \frac{e^{\sqrt{\kappa^2} r}}{2 r \sqrt {\kappa^2}} = A \frac{e^{-\kappa r}}{r} + A" \frac{e^{\kappa r}}{r} = A \frac{e^{-\kappa r}}{r},}

where  ,  , and Errore del parser (errore di sintassi): {\displaystyle A"} are undetermined constants

The electric potential is zero at infinity by definition, so Errore del parser (errore di sintassi): {\displaystyle A"} must be zero.[2]229

In the next step, D&H assume that there is a certain radius  , beyond which no ions in the atmosphere may approach the (charge) center of the singled out ion. This radius may be due to the physical size of the ion itself, the sizes of the ions in the cloud, and any water molecules that surround the ions. Mathematically, they treat the singled out ion as a point charge to which one may not approach within the radius  .[2]231

The potential of a point charge by itself is


D&H say that the total potential inside the sphere is[2]232


where   is a constant that represents the potential added by the ionic atmosphere. No justification for   being a constant is given. However, one can see that this is the case by considering that any spherical static charge distribution is subject to the mathematics of the shell theorem. The shell theorem says that no force is exerted on charged particles inside a sphere (of arbitrary charge). [8] Since the ion atmosphere is assumed to be (time-averaged) spherically symmetric, with charge varying as a function of radius  , it may be represented as an infinite series of concentric charge shells. Therefore, inside the radius  , the ion atmosphere exerts no force. If the force is zero, then the potential is a constant (by definition).

In a combination of the continuously distributed model which gave the Poisson–Boltzmann equation and the model of the point charge, it is assumed that at the radius  , there is a continuity of   and its first derivative. Thus[2]232


By the definition of electric potential energy, the potential energy associated with the singled out ion in the ion atmosphere is [2]230 & 232


Notice that this only requires knowledge of the charge of the singled out ion and the potential of all the other ions.

To calculate the potential energy of the entire electrolyte solution, one must use the multiple-charge generalization for electric potential energy: [2]230 & 232


Termine elettrico aggiuntivo al potenziale termodinamicoModifica



Template:Disputed This section was created without reference to the original paper and there are some errors in it (for instance, the ionic strength is off by a factor of two). Once these are rectified, this section should probably be moved to the nondimensionalization article and then be linked from here, since the nondimensional version of the Poisson–Boltzmann equation isn't necessary to understand the D&H theory.

The differential equation is ready for solution (as stated above, the equation only holds for low concentrations):


Using the Buckingham π theorem on this problem results in the following dimensionless groups:


  is called the reduced scalar electric potential field.   is called the reduced radius. The existing groups may be recombined to form two other dimensionless groups for substitution into the differential equation. The first is what could be called the square of the reduced inverse screening length,  . The second could be called the reduced central ion charge,   (with a capital Z). Note that, though   is already dimensionless, without the substitution given below, the differential equation would still be dimensional.


To obtain the nondimensionalized differential equation and initial conditions, use the   groups to eliminate   in favor of  , then eliminate   in favor of   while carrying out the chain rule and substituting  , then eliminate   in favor of   (no chain rule needed), then eliminate   in favor of  , then eliminate   in favor of  . The resulting equations are as follows:


For table salt in 0.01 M solution at 25 °C, a typical value of   is 0.0005636, while a typical value of   is 7.017, highlighting the fact that, in low concentrations,   is a target for a zero order of magnitude approximation such as perturbation analysis. Unfortunately, because of the boundary condition at infinity, regular perturbation does not work. The same boundary condition prevents us from finding the exact solution to the equations. Singular perturbation may work, however.

Verifiche sperimentali della teoriaModifica

To verify the validity of the Debye–Hückel theory, many experimental ways have been tried, measuring the activity coefficients: the problem is that we need to go towards very high dilutions.Typical examples are: measurements of vapour pressure, freezing point, osmotic pressure (indirect methods) and measurement of electric potential in cells (direct method).

Going towards high dilutions good results have been found using liquid membrane cells, it has been possible to investigate aqueous media 10−4 M and it has been found that for 1:1 electrolytes (as NaCl or KCl) the Debye–Hückel equation is totally correct, but for 2:2 or 3:2 electrolytes it is possible to find negative deviation from the Debye–Hückel limit law: this strange behavior can be observed only in the very dilute area, and in more concentrate regions the deviation becomes positive. It is possible that Debye–Hückel equation is not able to foresee this behavior because of the linearization of the Poisson–Boltzmann equation, or maybe not: studies about this have been started only during the last years of the 20th century because before it wasn't possible to investigate the 10−4 M region, so it is possible that during the next years new theories will be born.

Estensioni della teoriaModifica

Warning: The notation in this section is (currently) different from in the rest of the article.

A number of approaches have been proposed to extend the validity of the law to concentration ranges as commonly encountered in chemistry

One such extended Debye–Hückel equation is given by:


where   as its common logarithm is the activity coefficient,   is the integer charge of the ion (1 for H+, 2 for Mg2+ etc.),   is the ionic strength of the aqueous solution, and   is the size or effective diameter of the ion in angstrom. The effective hydrated radius of the ion, a is the radius of the ion and its closely bound water molecules. Large ions and less highly charged ions bind water less tightly and have smaller hydrated radii than smaller, more highly charged ions. Typical values are 3Å for ions such as H+,Cl,CN, and HCOO. The effective diameter for the hydronium ion is 9Å.   and   are constants with values of respectively 0.5085 and 0.3281 at 25 °C in water {{subst:#if:Skoog

 |{{subst:#if:|<ref name="" />}}


The extended Debye–Hückel equation provides accurate results for μ ≤ 0.1. For solutions of greater ionic strengths, the Pitzer equations should be used. In these solutions the activity coefficient may actually increase with ionic strength.

The Debye–Hückel equation cannot be used in the solutions of surfactants where the presence of micelles influences on the electrochemical properties of the system (even rough judgement overestimates γ for ~50%).

Voci correlateModifica



Collegamenti esterniModifica